Monolithic Dual-Band Quantum Cascade Laser

Navy SBIR 20.2 - Topic N202-115

Naval Air Systems Command (NAVAIR) - Ms. Donna Attick [email protected]

Opens: June 3, 2020 - Closes: July 2, 2020 (12:00 pm ET)



N202-115       TITLE: Monolithic Dual-Band Quantum Cascade Laser


RT&L FOCUS AREA(S): Quantum, Directed Energy



The technology within this topic is restricted under the International Traffic in Arms Regulation (ITAR), 22 CFR Parts 120-130, which controls the export and import of defense-related material and services, including export of sensitive technical data, or the Export Administration Regulation (EAR), 15 CFR Parts 730-774, which controls dual use items. Offerors must disclose any proposed use of foreign nationals (FNs), their country(ies) of origin, the type of visa or work permit possessed, and the statement of work (SOW) tasks intended for accomplishment by the FN(s) in accordance with section 3.5 of the Announcement. Offerors are advised foreign nationals proposed to perform on this topic may be restricted due to the technical data under US Export Control Laws.


OBJECTIVE: Develop a monolithic dual-band quantum cascade laser platform with almost beam diffraction limited output power >3 Watts each in the 4.6-5 and 3.6-4.2 micrometer bands.


DESCRIPTION: High-power, cost-effective, compact, and reliable mid-wave infrared (MWIR) Quantum Cascade Laser (QCL) platforms operating in the continuous wave (CW) regime are highly desirable for current and future Navy applications. Individual QCLs emitting within the 4.6-5 micrometer wavelength band with about 5 Watts CW output power and a wall-plug efficiency of about 20% at room temperature (RT) have been demonstrated [Ref. 1]. There is another, shorter MWIR spectral band between 3.6 and 4.2 micrometers [Ref. 2] that is also of interest for Naval applications. The atmospheric transmission in this band is about 45% to 50% higher than that of the 4.6-5 micron spectral band. Currently both QCLs emitting in both of the MWIR bands are beam-combined using external optical elements for current Naval applications.


While the current external beam combination configuration�s size and weight may be adequate for current platform applications, other aerial platforms such as compact rotary-wing aircraft and/or smaller unmanned aerial vehicles can benefit from a laser source that is at least 20 times smaller and lighter. A monolithic laser chip platform with a single optical output aperture emitting in both wave bands using a single laser driver electronics would minimize the overall laser size, weight, and cost as stated in the specifications below. Therefore, the goal of this SBIR topic is to develop a monolithic dual-band QCL-based source that meets the following performance specifications:

1.     Room-temperature CW optical power over 3W each in the 4.6-5 and 3.6-4.2 micrometer bands

2.     QCL package volume less 1 cm3

3.     QCL package weight less than 100 grams

4.     Wallplug efficiency exceeding 15%

5.     Almost diffraction limited beam quality factor with M2 < 1.5


Priority will be given to solutions minimizing weight and size, while meeting the optical power and efficiency requirement.


PHASE I: Develop and demonstrate the feasibility of a viable, robust, and manufacturable design for a single dual-band QCL source that meets or exceeds the requirements specified. Identify technological and reliability challenges of the design approach, and propose viable risk mitigation strategies.� The Phase I effort will include prototype plans to be developed in Phase II.


PHASE II: Design, fabricate, and demonstrate a packaged dual-band laser prototype based on the design from Phase I. Test and fully characterize the laser prototype to assess its performance. Report performance results.


PHASE III DUAL USE APPLICATIONS: Fully develop and transition the high performance QCL with the specifications stated in Phase II for DoD applications in the areas of Directed Infrared Countermeasures, advanced chemicals sensors, and Laser Detection and Ranging. The DoD has a need for advanced, compact, high performance MWIR QCL In Band IVA (3.8�4.1 micron) and Band IVB (4.6�5) micrometer bands combined emissions from a single laser aperture that can be readily scaled via beam combining for current and future generation DIRCMs, LIDARs, and chemicals/explosives sensing. The commercial sector can also benefit from this crucial, game-changing technology development in the areas of detection of toxic gases, environmental monitoring, and non-invasive health monitoring and sensing.



1. Bai, Y., Bandyopadhyay, N., Tsao, S., Slivken, S. & Razeghi, M. �Room Temperature Quantum Cascade Lasers with 27% Wall Plug Efficiency.� Applied Physics Letters, 2011.


2. Lyakh, A., Maulini, R., Tsekoun, A., Go, R., Von der Porten, S., Pflugl, C., . . . and Patel, C. �High-Performance Continuous-Wave Room Temperature 4.0-�m Quantum Cascade Lasers with Single-Facet Optical Emission Exceeding 2 W.� Proceedings of the National Academy of Sciences of the United States of America, 2010.


KEYWORDS: Quantum Cascade Lasers, QCL, Band IVA, Band IVB, 3.8 Micron, 4.1 Micron, 4.6 Micron, Midwave-Infrared, Laser Array



The Navy Topic above is an "unofficial" copy from the overall DoD 20.2 SBIR BAA. Please see the official DoD DSIP Topic website at for any updates. The DoD issued its 20.2 SBIR BAA on May 6, 2020, which opens to receive proposals on June 3, 2020, and closes July 2, 2020 at 12:00 noon ET.

Direct Contact with Topic Authors. During the pre-release period (May 6 to June 2, 2020) proposing firms have an opportunity to directly contact the Technical Point of Contact (TPOC) to ask technical questions about the specific BAA topic.

Questions should be limited to specific information related to improving the understanding of a particular topic�s requirements. Proposing firms may not ask for advice or guidance on solution approach and you may not submit additional material to the topic author. If information provided during an exchange with the topic author is deemed necessary for proposal preparation, that information will be made available to all parties through SITIS (SBIR/STTR Interactive Topic Information System). After the pre-release period, questions must be asked through the SITIS on-line system as described below.

SITIS Q&A System. Once DoD begins accepting proposals on June 3, 2020 no further direct contact between proposers and topic authors is allowed unless the Topic Author is responding to a question submitted during the Pre-release period. However, proposers may submit written questions through SITIS at, login and follow instructions. In SITIS, the questioner and respondent remain anonymous but all questions and answers are posted for general viewing.

Topics Search Engine: Visit the DoD Topic Search Tool at to find topics by keyword across all DoD Components participating in this BAA.

Help: If you have general questions about DoD SBIR program, please contact the DoD SBIR Help Desk at 703-214-1333 or via email at [email protected]