Analysis and Modeling of Erosion in Gas-Turbine Grade Ceramic Matrix Composites (CMCs)
Navy STTR 2019.B - Topic N19B-T033
NAVAIR - Ms. Donna Attick -
Opens: May 31, 2019 - Closes: July 1, 2019 (8:00 PM ET)


TITLE: Analysis and Modeling of Erosion in Gas-Turbine Grade Ceramic Matrix Composites (CMCs)


TECHNOLOGY AREA(S): Air Platform, Materials/Processes, Weapons ACQUISITION PROGRAM: NAE Chief Technology Office

OBJECTIVE: Develop and demonstrate a physics-based erosion model for gas-turbine grade ceramic matrix composites (CMCs).


DESCRIPTION: CMCs are currently being considered for use in hot-section hardware of advanced aero engines with goals of increased performance and efficiency. Concerns exist regarding the degradation of CMCs due to life- limiting phenomena associated with thermal, mechanical, chemical, and environmental effects. Of particular concern is erosion by small particles such as sand, dust, and other fine erosive objects ingested into hot-sections of engines. Since CMCs are brittle in nature and some sections of CMC components such as airfoils are in a thin configuration, erosion generates a varying degree of damage from localized micro-fracture to significant material removal, depending on the severity of erosion events. Consequently, erosion in CMC hardware can result in a reduction in load-carrying capacity, a premature component life, and a loss of related functions. Significant science and technology activities have modeled erosion behavior in metallic, polymeric, and coating materials systems [Refs 1-3]. However, despite its importance and demand, to date no pertinent model exists able to describe erosion phenomena of CMCs. Erosion in CMCs has shown to be very complex due to the random and violent nature of erosion events coupled with the materials’ architectural and constituent complications [Refs 4,5]. As a consequence, an emerging need exists to develop an innovative physics-based erosion model for CMCs. The model, at a minimum, is to be able to predict the rate and shape of material removal with respect to type of materials for given erosion conditions. The approach is also expected to leverage overall experimental and fabrication efforts/iterations and to contribute to the improvement of the design of CMCs that are more durable and reliable against erosion. In general consideration, but not limited, target materials are gas-turbine grade CMCs, erosive particles are silica or ceramic-based and random in shape with varying sizes of 50-200 micrometers, and particle velocities are in a range of Mach 0.2 to 2.


PHASE I: Design and develop an initial erosion model concept and demonstrate feasibility for the CMC material systems. The Phase I effort will include prototype plans to be developed under Phase II.

PHASE II: Fully develop and optimize the approach formulated in Phase I. Demonstrate and validate the approach using pertinent data obtained from selected materials systems under appropriate erosion conditions.


PHASE III DUAL USE APPLICATIONS: Perform validation and certification testing. Transition the approaches to CMC propulsion applications for platforms such as Variable Cycle Advanced Technology (VCAT), Versatile Affordable Advanced Turbine Engines (VAATE), and other advanced Naval engines. CMC propulsion materials have great potential to the civilian aerospace engine applications and are being transitioned in some areas. The proposed erosion technology development will benefit the private sector in their efforts to enhance the overall durability and reliability of CMC hardware. Industries such as land-based or marine gas turbine engine industries, automotive industry, and material developers/designers would benefit from successful technology development.



1.   Gopferich, A. and Langer, R. “Modeling of Polymer Erosion.” Macromolecules, 26 (16), 1993, pp. 4105-4112.


2.   Grant, G. and Tabakoff, W. “Erosion Prediction in Turbomachinery Resulting from Environmental Solid Particles.” Journal of Aircraft, 1975, pp. 471-478.


3.   Kedir, N., Gong, C., Sanchez, L., Presby, M., Kane, S., Faucett, C., and Choi, S. “Erosion in Gas-Turbine Grade Ceramic Matric Composites (CMCs).” Journal of Engineering for Gas Turbines and Power, 2018.


4.   Wellman, R. and Nicholls, J. “A Monte Carlo Model for Predicting the Erosion Rate of EB PVD TBCs.” Wear, Volume 256, Issues 9-10, pp. 889-899 (1-38). 532002677-142685204.1531247380


KEYWORDS: Ceramic Matrix Composites; CMCs; Gas-Turbine Grade CMCs; Erosion; Erosion Modeling; Erosive Particles; Erodent



Sung Choi





Calvin Faucett





NOTICE: The data above is for casual reference only. The official DoD/Navy topic description and BAA information is available on FedBizOpps at

These Navy Topics are part of the overall DoD 2019.B STTR BAA. The DoD issued its 2019.B BAA STTR pre-release on May 2, 2019, which opens to receive proposals on May 31, 2019, and closes July 1, 2019 at 8:00 PM ET.

Between May 2, 2019 and May 30, 2019 you may communicate directly with the Topic Authors (TPOC) to ask technical questions about the topics. During these dates, their contact information is listed above. For reasons of competitive fairness, direct communication between proposers and topic authors is not allowed starting May 31, 2019
when DoD begins accepting proposals for this BAA.

Help: If you have general questions about DoD SBIR/STTR program, please contact the DoD SBIR/STTR Help Desk at 800-348-0787 or via email at