Development of Dielectric Films for Wound Capacitors Navy SBIR FY2008.1 Sol No.: Navy SBIR FY2008.1 Topic No.: N08-076 Topic Title: Development of Dielectric Films for Wound Capacitors Proposal No.: N081-076-0308 Firm: Sigma Technologies Intl Inc. 10960 N. Stallard Place Tucson, Arizona 85737 Contact: Gordon Goodyear Phone: (520) 575-8013 Abstract: This proposal addresses the development a high dielectric constant polymer films that will be used to produce self healing high energy density capacitors. The polymer dielectric is produced using a non contact method which results in defect-free, high temperature polymers that have an amorphous structure, high breakdown strength and low dielectric absorption. The complete metalized capacitor film will be produced in a one step roll to roll process with no handling or contact between the polymer formation and metallization steps. The polymer dielectrics can be formulated with a wide range of dielectric constants and thicknesses ranging from 100nm to 10+μm. The proposed development will focus in the formulation of polymer dielectrics with high dielectric constants which have been shown to have superior self healing properties, higher temperature capability and breakdown strength than conventional metalized film dielectrics. The capacitor film production process will incorporate a unique step that allows the formation of very thin corrosion stable, heavy edge electrodes, which are necessary for producing high energy density metalized capacitors. The phase one program will focus in evaluating the energy density of capacitors with high k polymers and different dielectric thickness. Deliverables will include 1ftx1ft capacitors and parametric data such as capacitance and dissipation factor as a function of temperature, dielectric absorption, energy density, and dV/dt charge and discharge characteristics. Benefits: IApplications include high frequency inverters, pulse power systems for directed energy weapons, electromagneric propulsion, electronic warfare and countermeasure pulse generators, pulsed lasers, short pulse radar modulators, isotope separation lasers, defibrillators, power level loading, switcher power supplies, automotive electronics, and electric vehicle commutation circuits. Return